Saturday, December 6, 2014

Craft

Every once in a while, I can be a crafty bastard.

I recently spent Thanksgiving in Alaska and while we were there, my wife had her birthday. Being broke from spending money on travelling, I had to come up with a meaningful gift, given with love on a very low budget. So I decided to make my wife a traditional Eskimo knife; an ulu. To do this, I spent very little money and invested a few hours of crafty handed labor.

First I bought a circular saw blade from a local hardware store. My best friend provided the tools and garage to work in for the next phase of my plan. I cut the circular saw into thirds (roughly) and ground off the teeth and smoothed all the edges. I then took a piece of caribou antler to create a handle and cut a groove to fit the blade and then drilled two holes on the antler and on the blade. After drilling all the holes, I polished the blade surfaces and ground a rough edge to sharpen later on the outer edge. To secure the antler to the blade for a handle, I cut a crocheting needle into pieces to use as rivets. I applied an epoxy  into the groove of the handle and then riveted the handle to the blade. I then ground down the excess from the rivets and sharpened the blade of the newly formed ulu. For a finishing touch I even etched her name on the face of the blade.

The end result was a hardy knife for kitchen use and abuse. And my wife loved it. Win/win.





In hindsight, I should have taken pictures of the work in progress for the blog. But in my defense, I was thinking about my wife and not my blog when I made this.

Friday, November 14, 2014

Heroes.

Last year this day, I lost a very dear friend. Brian Eisenhard was a man I spent the entirety of my Marine Corps career with. We lived, worked, and suffered together all those years. Despite those hardships, and through every experience we shared, he never wavered, never quit, never let you down. Not only was he a rock through hard times, he was a natural problem solver. He made his job look easy. Before he joined the Marine Corps he was a college dropout and an adept mechanic and welder, building submarines in Virginia for Northrop & Grumman. To say he was sharp would be an understatement. He knew machines, he knew people, and he could shred on the guitar like it was nobody's business. Quiet and reserved, he kept his peace until it was absolutely necessary; every bit the quiet, humble professional. As a Sergeant of Marines, he was respected by his peers and emulated by his juniors. But more than that, he was my brother and personal hero.

Fair winds and following seas, brother.
Brian in Afghanistan 2010

Brian on the left. Marine Corps Ball 2009


Tuesday, November 11, 2014

Veterans Day

From the previous post, it becomes pretty obvious that I am a veteran Marine. Today we give thanks and show appreciation for those who have dedicated the best years of their lives, and sometimes their entire lives, to serving our country in uniform.

Personally, I've never been one to be thanked. For me, my military service was simply as a man doing his job. Though I served in Iraq and Afghanistan, my service was about the Marines I served with. My life has been indelibly changed by those I have had the privilege of locking step with and I hope I was able to make a difference in their lives as much as they made a difference in mine.

A monument to my sins.

Monday, November 10, 2014

239 years

On November 10th 1775 America's Corps of Marines was established. 239 years later, the United States Marine Corps continues to be America's force in readiness. I have been humbled to have contribute years of my life to its storied history of service and sacrifice.
The time I spent was worth it. I have been honored to serve with America's best and I am forever grateful for what I have become because of it.

Happy birthday Marines. Semper Fidelis.


Saturday, October 4, 2014

Build it back up.

So the bathroom is officially finished (much to my wife's relief) and this post will cover what happened between now and the last post. 

After replacing the sub floor and tearing out the tile around the bath tub, we needed to replace the wall with cement backer board and place cement backer board on the floor as well for water proofing. We set about cutting the backer board to the correct dimensions and marked out holes for the toilet drain and shower fixtures. 

At this point the semester had started so neither me nor my brother had the time to cut and lay tile, so we hired a contractor to do it. He set in the backer boards and laid the tile, but he took his sweet time doing it and we were getting over our established budget so we fired that guy. 

At this point all we had to do was grout the. So we did.





At this point we just had to clean it up and install the toilet, sink, and shower fixtures and put on the finishing touches. 

Here is what that looked like:



All done. Well, mostly. There's still some caulking to be done around the tiles on the wall, but I'll get to that some other time.

Tuesday, September 16, 2014

Tear it down

So my wife and I have moved into a new place and we've decided to renovate the bathroom. I've never really done anything like this, but I can't say that I'm worried about it too much. 

Here is what it looked like before.

We decided to replace the sink and toilet and tile the floor and wall as well as re-tile the shower and replace the fixtures for the shower. 

Here comes the fun/easy part; tearing it all out.




After removing the sink, toilet, and removing the linoleum we discovered that the sub floor under the toilet had severe water damage and had rotted past the point of safety. We also discovered that the toilet was originally positioned on the same wall as the sink. So, we added some PVC piping to move the drain for the toilet back to where it was originally and installed a new sub floor. 


Look at us go.

Saturday, September 13, 2014

I suppose I should have added a personal introduction earlier, but I'll get around to it now. My name is Martin de la Cruz and I am a first generation American. My father was a Filipino immigrant and my mother was an Air Force brat that met my father on Guam. I consider myself a jack of all trades. During my short existence so far I have been able to become an adept janitor, mechanic, marksman, reader, writer (when I feel like it), and leader on some occasions. So far I haven't really felt too attached to any one profession, hence the title of my blog. Let's see what happens.

Thursday, September 11, 2014

9/11

A day that will live in infamy. Many people remember where they were when the towers fell. I was a freshman in Kotzebue High School, in rural Alaska. I can't say that I understood fully the significance of those terrible events then, but time has taught me many things.

Just like every American, my life was forever changed at the behest of those attacks. We must never forget those that died that day. Nor should we ever forget those that gave their lives willingly for their country in the resultant wars. As a veteran of both those wars in Iraq and Afghanistan, I will certainly never forget.

This is my humble tribute in memorial.


Wednesday, September 10, 2014

Introduction

Hello Internet,

My name is Martin de la Cruz and this is my humble blog. The purpose and intent of my blog is to simply post my musings about life and my personal experiences, as well as the various DIY projects I undertake from time to time. I am a man of simplicity, and the format and content of my blog will reflect that. I'm also new to blogging and anything of the sort, so I'll ask that you please excuse the crude quality of my blog compared to myriad of other blogs that populate this vast and infinite web.

Until next time,

Martin.